Straight Side Double Crank Press

Protected by hydraulic overload
When the press is operating under overloading, the oil escapes through the metal seal and the press is brought to stop instantly.
Structural design
To avoid of the inevitable opening of C-type Press and reduce the deformation, furthermore, to extend the life of press, the rigid frame structure design is applied in SH2 series.
This structure would keep the parallel between slide & bolster, and better control the eccentric load to facilitate precise processing.

SH2-110
Model			1	2
Capacity		ton	110
Tonnage rating point (above B.D.C.)		mm	5
Stroke length		mm	110	180
Stroke per minute		spm	50~100	35~70
Die height, slide to bolster		mm	350	400
Slide adjustment		mm	90
Slide area (a1 x b1)		mm	1360 x 520
Bolster area (a2 x b2)		mm	1660 x 680
Bolster thickness		mm	155
Side opening (b3 x h3)		mm	700 x 285	700 x 335
Approx dimensions	Bolster surface height h1	mm	900
	Press overall height h2	mm	3115	3200
	Position of anchor bolt (a3 x b4)	mm	1950 x 1150
	Floor space required (a4 x b5)	mm	2240 x 1700
	Max. measurement of press (a5 x b6)	mm	2240 x 2460
Main motor		HP x p	15 x 4
Required air pressure		kg/cm	5

SH2-160
Model			1	2
Capacity		ton	160
Tonnage rating point (above B.D.C.)		mm	6
Stroke length		mm	130	200
Stroke per minute		spm	40~90	30~60
Die height, slide to bolster		mm	400	450
Slide adjustment		mm	100
Slide area (a1 x b1)		mm	1500 x 580
Bolster area (a2 x b2)		mm	1800 x 760
Bolster thickness		mm	165
Side opening (b3 x h3)		mm	780 x 325	780 x 375
Approx dimensions	Bolster surface height h1	mm	900
	Press overall height h2	mm	3260	3345
	Position of anchor bolt (a3 x b4)	mm	2270 x 1300
	Floor space required (a4 x b5)	mm	2530 x 1650
	Max. measurement of press (a5 x b6)	mm	2530 x 2368
Main motor		HP x p	20 x 4
Required air pressure		kg/cm	5

SH2-200
Model			1	2
Capacity		ton	200
Tonnage rating point (above B.D.C.)		mm	7
Stroke length		mm	150	250
Stroke per minute		spm	35~75	25~50
Die height, slide to bolster		mm	450	500
Slide adjustment		mm	110
Slide area (a1 x b1)		mm	1850 x 650
Bolster area (a2 x b2)		mm	2150 x 840
Bolster thickness		mm	170
Side opening (b3 x h3)		mm	860 x 365	860 x 415
Approx dimensions	Bolster surface height h1	mm	1000
	Press overall height h2	mm	3700	3800
	Position of anchor bolt (a3 x b4)	mm	2620 x 1400
	Floor space required (a4 x b5)	mm	2900 x 1750
	Max. measurement of press (a5 x b6)	mm	2900 x 2583
Main motor		HP x p	30 x 4
Required air pressure		kg/cm	5

SH2-250
Model			1	2
Capacity		ton	250
Tonnage rating point (above B.D.C.)		mm	7
Stroke length		mm	170	280
Stroke per minute		spm	25~60	20~40
Die height, slide to bolster		mm	450	550
Slide adjustment		mm	120
Slide area (a1 x b1)		mm	2100 x 700
Bolster area (a2 x b2)		mm	2400 x 920
Bolster thickness		mm	180
Side opening (b3 x h3)		mm	940 x 355	940 x 455
Approx dimensions	Bolster surface height h1	mm	1100
	Press overall height h2	mm	4100	4255
	Position of anchor bolt (a3 x b4)	mm	2920 x 1500
	Floor space required (a4 x b5)	mm	3200 x 1850
	Max. measurement of press (a5 x b6)	mm	3200 x 2703
Main motor		HP x p	40 x 4
Required air pressure		kg/cm	5

SH2-300
Model			1	2
Capacity		ton	300
Tonnage rating point (above B.D.C.)		mm	6
Stroke length		mm	200	300
Stroke per minute		spm	20~50	15~35
Die height, slide to bolster		mm	600	650
Slide adjustment		mm	130
Slide area (a1 x b1)		mm	2400 x 900
Bolster area (a2 x b2)		mm	2600 x 1200
Bolster thickness		mm	200
Side opening (b3 x h3)		mm	1220 x 530	1220 x 580
Approx dimensions	Bolster surface height h1	mm	1150
	Press overall height h2	mm	4420	4520
	Position of anchor bolt (a3 x b4)	mm	3260 x 1650
	Floor space required (a4 x b5)	mm	3560 x 2100
	Max. measurement of press (a5 x b6)	mm	3500 x 2978
Main motor		HP x p	50 x 4
Required air pressure		kg/cm	5

Description